Blind Flange
(Total 10 Products)
-
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaThe blind plate is commonly known as the blind plate. The material of the blind plate is carbon steel, stainless steel, alloy steel, copper, aluminum, etc. The sealing surface is flat, convex, and concave-convex. The blind plate is used for... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaThe official name of the blind plate is the flange cover, and some are also called blind flanges or pipe plugs. It is a flange without a hole in the middle and is used to seal the pipe opening. The function is the same as that of the head and cap,... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaBlind plates are generally divided into four types: forging, casting and forging, medium plate cutting, and casting. Among them, the price of forged products is the highest, followed by medium plate, and casting and forging is the lowest. Casting is... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaThe blind plate is mainly used to completely isolate the production medium to prevent production from being affected or even accidents caused by the shut-off valve being lax. The blind plate should be installed in the part that requires isolation,... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaThe blind plate should be set at the part that requires isolation (cut-off), such as at the port of the equipment, before and after the shut-off valve or between two flanges. It is usually recommended to use a figure 8 blind plate; a plug-in plate... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaThe blind plate plays the role of isolation and cutting, which is the same as that of the head, pipe cap and welding plug. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems that require complete... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaOur forging factory is a manufacturer of pressure vessel forgings, blind flange forgings, and forgings of various materials. The formal name of the blind plate is flange cover; some are also called blind flanges. It is a flange without a hole in the...
-
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaThe role of the blind plate is to isolate and cut off. It is connected to the flange of the same specification with bolts, and a sealing gasket is sandwiched between the two, which can seal one end of the pipe and block it to form a blind end, so it...
-
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaApplication of the blind plate 1. In the initial start-up preparation stage, when the strength test or tightness test of the pipeline is carried out, it cannot be carried out simultaneously with the connected equipment (such as turbines,... -
Min. Order:10 Piece/PiecesTransportation:OceanPlace of Origin:Jiangsu, ChinaFrom the appearance point of view, the blind plate is generally divided into plate-type flat blind plate, 8-shaped blind plate, insert plate, and backing ring (the insert plate and the backing ring are mutually blind). The blind plate plays the role...
Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings.
From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.
However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.
Blind Flange
A blind flange is a solid disk that is used to block off a pipeline or to create a stop at the end of a piping system. It is typically used to close off the ends of a piping system and is bolted in place with bolts and gaskets to create a tight seal. Blind flanges are commonly used in applications where the end of the pipe needs to be closed off temporarily or permanently. They are available in various sizes, materials, and pressure ratings to suit different piping system requirements.