Home> Products> Steel Flange> Tongue And Groove Face Flanges

Tongue And Groove Face Flanges

(Total 6 Products)

The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it's face.

Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.

Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.

General flange faces such as the RTJ, TandG and the FandM shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.

Tongue And Groove Face Flanges
A tongue-and-groove face flange is an assembly method that connects two parts, one with a raised tenon and the other with a grooved tongue and groove. The parts are joined by inserting the tenon into the groove. This connection method can provide strong load-bearing capacity and stability, and is often used in mechanical equipment, building structures and other fields.
Home> Products> Steel Flange> Tongue And Groove Face Flanges

Copyright © 2024 Fuyuan Marine Accessories Co., Ltd All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send